Address: | 135 Crotty Rd, Middletown, NY 10941, USA |
---|---|
Postal code: | 10941 |
Phone: | (845) 746-4300 |
Monday: | 8:00 AM – 5:00 PM |
---|---|
Tuesday: | 8:00 AM – 5:00 PM |
Wednesday: | 8:00 AM – 5:00 PM |
Thursday: | 8:00 AM – 5:00 PM |
Friday: | 8:00 AM – 1:00 PM |
Saturday: | Closed |
Sunday: | Closed |
Good service
Very friendly and hard working staff
Top of the line customer service
Cisco 300 Series Manual Online: Spanning-tree Mst Port-priority. 845. • priority—Specifies the port priority. (Range: 0-240 in multiples of 16).
system priority, system ID, port priority, and the port number. In priority comparisons, numerically lower. values have higher priority. The switch uses the priority to decide which ports should be put in standby. mode when there is a hardware limitation that prevents all compatible ports from aggregating.
Cisco Catalyst 3120 Manual Online: Lacp Port-priority. lacp port-priority Use the lacp port-priority interface configuration command on the switch stack or on a standalone switch to configure the port priority for the Link Aggregation Control Protocol (LACP).
If a loop occurs, the MSTP uses the port priority when selecting an NNI to put into the forwarding state. You can assign higher priority values (lower numerical values) to NNIs that you want selected first port-type nni interface configuration command. before attempting to configure MST port priority.
The software uses the port priority value for access ports and the VLAN port priority values for trunk ports. Note Use this command to configure the port priority for Rapid per VLAN Spanning Tree Plus (Rapid PVST+) spanning tree mode, which is the default STP mode.
An LACP port priority is configured on each port using LACP. The port priority determines which ports should be put in standby mode when there is a hardware limitation that prevents all compatible ports from aggregating. A link with higher priority (smaller in value) gets preference over a link with...
746. 747. 748. Interface: Ethernet1/0. Port priority information. Port priority :4. qos trust.
Port priority (also known as controller slot priority) is a set of rules that determine the outcome of certain situations between characters, during matches. These rules are based on the numbered player ports (slots) in which each player plugs in, or occupies with their controller...
Each port of a Switch has a Spanning Tree Port Priority value associated with it, which is equal to 128 by default. Normally, a Port ID is denoted in Hexadecimals similar as 0x8015, which is equivalant to 128.21 in decimals, where the first part is the default Port Priority number and second part is the...
Port priority is supported on port channels that are enabled with LACP physical interfaces. The lacp port-priority command sets the aggregating port priority for the configuration mode interface. Example • This command assigns the port priority of 4096 to Ethernet interface 1.